In industries such as mining, building materials, and metallurgy, the choice of equipment for primary crushing is crucial when dealing with hard, large pieces of raw ore or construction waste. When your feed size reaches 60cm x 60cm, ordinary crushing equipment often falls short.
At this point, the PCZ series heavy-duty hammer crusher becomes the ideal choice. Among them, the PCZ1308 and PCZ1310 are two widely used and popular models.
What are their capabilities? And how should you choose one based on your specific needs? This article will reveal all.
I. Why is the PCZ heavy-duty hammer crusher the ideal choice for crushing 60x60cm materials?
The PCZ series heavy-duty hammer crusher is renowned for its unique structural design and powerful crushing force. It adopts a one-step crushing principle, with a huge hammer impact force, directly crushing large-sized materials to the ideal particle size, avoiding the cumbersome process of secondary or even tertiary crushing. It is particularly suitable as the primary crushing equipment in a production line. Its wide feed inlet and deep crushing chamber easily handle material sizes up to 60x60cm, ensuring smooth and efficient production line operation from the source.
II. Comparison of Core Parameters between PCZ1308 and PCZ1310
To make the right choice, we must understand the core differences between the two machines. The table below provides a clear comparison:
Features and Parameters: PCZ1308 Heavy-Duty Hammer Crusher | PCZ1310 Heavy-Duty Hammer Crusher
Feed Inlet Size (Width x Length): 850x800 mm | 1000x850 mm
Maximum Feed Side Length: ~600-650 mm | ~700-750 mm
Processing Capacity: 100-180 t/h | 150-220 t/h
Motor Power: 132-160 kW | 180-220 kW
Equipment Weight (approx.): 12.5 tons | 15.8 tons
Key Takeaways:
1. Processing Capacity and Power: The PCZ1310 has a larger feed inlet size and motor power than the PCZ1308. This means it can handle larger materials (theoretically up to 75cm) and has a higher hourly output efficiency. If your materials are generally larger than 60cm and you have high output requirements, the PCZ1310 is a better choice.
2. Applicable Scenarios:
◦ PCZ1308: More suitable for medium-sized production lines, handling materials around 60cm with ease. It has relatively low equipment investment and operating costs (electricity consumption), offering excellent cost-effectiveness.
◦ PCZ1310: Designed for large, high-output production lines, it allows for future capacity increases, has stronger resistance to shock loads, and operates more stably.
III. Selection Recommendations: How to Make a Decision Based on Your Needs?
• Scenario A: Your material size is consistently around 60x60cm, your budget is relatively limited, and your current planned output is below 200 tons per hour.
◦ Recommendation: PCZ1308. It fully meets your needs and offers a higher return on investment.
• Scenario B: Your material size occasionally exceeds 60cm, or you anticipate needing to increase capacity to over 200 tons per hour in the future, pursuing maximum production line efficiency and stability.
Recommendation: PCZ1310. Its superior processing capacity and larger power reserve ensure long-term stable and efficient operation of the production line, avoiding equipment bottlenecks caused by material fluctuations or capacity upgrades.
Both the PCZ1308 and PCZ1310 are powerful performers for crushing 60x60cm large materials. The choice between them is not simply a matter of good or bad, but rather a precise match based on specific working conditions, output requirements, and investment budget. We recommend that you inform our technical engineers of the material's hardness, particle size distribution, expected output, and long-term plans. We will provide you with the most professional selection solutions and equipment quotations.
Contact us now for a customized crushing solution!
