150-250 t/h Large-Scale Sand Production Line Configuration Plan

Equipment configuration	Hopper, ZSW1100x4200 vibrating feeder, PE750x1060 jaw crusher，HPC300/CS220 cone crusher (or impact crusher), VSI9526 sand making machine, Vibrating screen, Sand recycling machine, Belt conveyor.
Raw materials	Limestone, Granite, Basalt, Quartz, River stone etc.
Feed Size	Less than 630mm
Capacity	150-250t/h
Finished product	Fine sand 0.25-0.35mm, medium sand 0.35-0.5mm, coarse sand 0.5mm
Application	In sand quarry, mine, construction site, highway, road and bridge construction, concrete mixing station, water conservancy and hydropower, chemical industry and other industries.
Advantages	High production efficiency and low operating cost; Multi-functions and Flexible application; Good shape of finished sand and fineness is adjustable.

Production line related products

If you can't find other products, please contact customer service If you can't find other products, please contact customer service

Trommel Screen

As a widely used screening equipment, the drum screen plays an important role in many fields due to its high efficiency, convenience, and environmental protection. The working principle is to control the sorting of materials based on the particle size.

Inquiry

Jaw Crusher

Jaw crusher is the core coarse crushing equipment in mining, construction, sand and gravel industries, mainly used for crushing hard materials such as granite, basalt, iron ore, etc. It adopts the principle of movable jaw and fixed jaw extrusion crushing, has the advantages of a large crushing ratio (4-10), simple structure, easy maintenance, etc., and is the preferred primary crushing equipment for crushing production lines.

Inquiry

PEX Fine Jaw Crusher

PEX fine jaw crusher is a fine crushing model of jaw crusher, mainly used for medium and fine crushing of medium-hard materials (such as granite, basalt, limestone, etc.), suitable for mining, building materials, metallurgy, chemical industry and other industries. Compared with PE coarse jaw crusher, PEX model has finer material (usually 0-20mm adjustable), suitable for secondary crushing or fine crushing process.

Inquiry

150-250tph Sand making production line introduction:

PE750x1060 jaw crusher:

• As primary crushing equipment, it can break large stones into particle sizes suitable for further processing.

• PE750x1060 means that its inlet width is 750mm and its length is 1060mm, which is suitable for large-scale sand making production lines.

CS220 cone crusher:

• As a secondary crushing equipment, cone crusher is usually used for medium and fine crushing to further improve the crushing efficiency of materials.

• CS220 represents its strong processing capacity and can handle medium to high hardness stones.

3YK1860 vibrating screen:

• The vibrating screen is used to screen the crushed materials and divide the materials into different grades according to their particle size.

• 3YK1860 means that the vibrating screen has three layers of mesh and a size of 1800mm x 6000mm, which is suitable for large-scale screening operations.

VSI9526 sand making machine:

• The sand making machine is the core equipment of the entire production line, responsible for turning the crushed materials into sand that meets the requirements.

• VSI9526 represents its large processing capacity and is suitable for sand making production lines with high output requirements.

150-250tph Sand making production line

Production line related products

150-250tph Sand making production line introduction:

Recommended Videos

LEAVE MESSAGE