C120 Jaw Crusher: Low Energy Consumption, High Output, Reducing Your Crushing Cost by 30%

Differences between C series jaw crusher and traditional jaw crusher

C series jaw crusher:

✔️ Equipped with variable frequency speed regulation technology, energy consumption is reduced by 25%-30% (compared with traditional models);

✔️ Hydraulic system assists the movement of the movable jaw to reduce reactive power loss.

✔️ The large-angle feeding design improves the material passing rate, and combined with the heavy movable jaw, the crushing efficiency is increased by 40%;

✔️ Actual measured capacity is 300-500 tons/hour (hard rock working conditions).

Traditional jaw crusher:

✔️ Fixed speed motor, large energy consumption fluctuations, obvious energy waste;

✔️ High mechanical friction loss, and significant electricity cost for long-term operation.

✔️ Limited feeding, easy to block, and the output is usually 200-350 tons/hour;

✔️ Frequent shutdown for cleaning, affecting continuous operation efficiency. C120 jaw crusher product core advantages

1. Ultra-low energy consumption design

- Adopting high-efficiency energy-saving motor + optimizing crushing chamber structure, the energy consumption is reduced by 25%-30% compared with traditional models, and the annual operating cost is significantly saved.

- Intelligent frequency conversion control system dynamically adjusts the power according to the load to avoid energy waste.

2. High production capacity performance

- The large-angle feed inlet design improves the material passing rate; the combination of heavy-duty movable jaw and wear-resistant lining increases the crushing efficiency by more than 40%.

- Measured production capacity: 300-500 tons/hour (adjusted according to the hardness of the material), and the continuous operation stability is strong.

3. Comprehensive cost reduction by 30%

- Combined with energy consumption and maintenance cost optimization, the investment recovery period is shortened to **less than 18 months** (taking medium-sized mines as an example).

- Long-life accessories (such as high manganese steel linings with a life of 2000 hours+) reduce the frequency of shutdown and replacement.

C120 jaw crusher key technical parameters

C120 jaw crusher applicable scenarios and materials

- Typical industries:

Ore mining (iron ore, copper ore), sand and gravel aggregate production, construction waste recycling, slag crushing in the metallurgical industry.

- Applicable materials:

Granite, basalt, limestone, river pebbles, coal gangue, concrete blocks and other medium and high hardness materials.